Den Tal Implant Electric Torque Wrench Universal Handpiece Screwdriver Dent Istry Repair Tools

• Customization: Available
• Type: Dental Health Materials
• Material: Metal
• Model NO.: IM-11013
• Nature: Dental Implant Tool
• Certification: Dental Implant Tool
• Kind: Needle & Hook
• Shelf Life: 2 Years
• Safety Standard: GB/T18830-2009
• Instrument Classification: Class III
• Warranty: 1 Year
• Power Source: Manual
• Quality Certification: TUV
• Color: Silver
• After-Sale Service: Online Technical Support
• Feature: Convenient
• Name: Dental Implant Tool
• Transport Package: Box
• Specification: 21.2*10.2*6.7cm
• Trademark: NICEDEN
• Origin: China
• Production Capacity: 5000

Product Description

Product Description

Power adapter Input Voltage:100V-240V~50/60Hz Output voltage:d.c.5V,IA Model No.:GC09-050100-5A Battery Type:Lithium-ion Battery Capacity:800mAh Charging voltage:3.7v Model No.:INR 14500 Program Parameters Standard Head:20:1 Net weight:155g Rotation speed:10-50r/min Torque: 5-50N.cm

Specific operation Step 1, power on: long press the power switch key for about 2 seconds to power on. The second step, start working: short press the key to enter the working state. The third step, pause or stop: in the working state, short press the key to enter the pause or stop working state,then return to the standby state. The fourth step,shutdown: in the standby state, long press the power switch button about 2 seconds to shutdown,or 3 minutes without any operation, the machine automatically shutdown.

Program settings 1.Forward and reverse setting: short press forward and reverse button to set forward and reverse mode, when set to reverse, the program defaults to maximum torque (not adjustable). 2.Speed setting: short press the speed key S, every time you press it, the speed can be adjusted from 10,15, 20 ...... The speed can be adjusted from 10, 15, 20_ .50r/min sequentially. 3.2 Torque setting: short press torque key N, every press, the speed can be adjusted from 5, 10, 15...... The speed can be adjusted from 5, 10, 15..50N.cm in cyclic order. 4. Under the state of power off, press and hold the torque key N and the power on/off key (2S) at the same time, the screen will light up, then you can press the N key to select the center of the screen, then you can select the center of the screen. Then you can press N to select Chinese and English, auto power off time, standby time, left and right hand habit, volume,calibration, factory reset mode, and then press the forward and reverse buttons and the S button to adjust to the desired function,and finally press the power switch button to exit to complete the setup.

Warning 1)Please don't turn on the power to work when charging; 2)Do not use the bent and deformed screw up to avoid breakage and damage accidents; 3)The body can not be sterilized by high temperature, you can wipe it with alcohol; 4)The charger plug should be pulled out from the end of the cell phone after charging; 5)Please do not use or place this product under high temperature to prevent heat-induced short circuit and device discoloration. 6)This product is an electronic product and is not waterproof; 7)Please use the power adapter from the factory to avoid short circuit of the device.

Maintenance and conservation practices 1)Maintenance of the main unit: a. If not used for a long period of time, please recharge the battery every 15 days; b. The wrench motor mainframe should be de-energized within two hours after it is fully charged or the battery may be damaged. c. After use, wipe the host shell with a soft cloth and alcohol, and store it in a dry, well-ventilated place after the surface of the host is completely dry. Note: Do not use highly concentrated ethanol or corrosive liquids to wipe the main unit. 2) Maintenance of the bender: a. 0il must be sprayed into the shaft center from the screw start insertion port every day to maintain the life of the shaft. b. At the end of each day, the use of spray lubricant should be sprayed once, each time at least 1-2 seconds.c. If the workload is large, should be at the end of each day at noon, afternoon spraying. c. If the workload is heavy, spray the shaft once a day at noon and once a day in the afternoon at the end of the day. d. Spraying should also be done prior to autoclaving.d. Spray lubricant should also be applied prior to autoclaving.

Cleaning and Disinfection NOTE: Please sterilize 20:1 benders and screwdrivers only. After each use, they must be autoclaved as described below: 1. Remove the screwdriver from the bender, then brush the dirt from the bender with a soft brush and wipe with a sterilized alcohol cotton ball. b. Lubricate the bender (see "Maintenance and Care Practices"). 2. Lubricate the bender (see "Maintenance and care practices"). 3. Sterilize and label the machine with a sterilization kit. d. Do not exceed the temperature of the machine during sterilization. 4. Do not exceed 135C during sterilization (e.g.,121 C for 20 minutes, 134 C for 15 minutes). 5. When not in use, seal in a sterile bag and place in a dry, well-ventilated place.

 

Detailed Photos

Product Parameters

 

Hign-concerned Chemical	none
Commodity Quality Certification	ce
Shelf Life	2 Years
Origin	Mainland China
Name	Dental Implant tool
Feature	Convenient
After-Sale Service	Online Technical Support
Power Source	Manual